Back to
30 Amp PWM Digital Solar Charge Controller

The Zamp Solar ZS-30AP 12 Volt / 30 Amp PWM Solar Controller / Regulator suits Gel, AGM, Conventional lead-acid and Calcium Batteries.

It contains a built in PWM 4 stage regulator to prevent your battery from being overcharged. (Overcharging occurs when the charge voltage is unregulated. This can result in premature battery failure.)

It can be connected to the battery permanently to keep the battery fully charged by using a process called “floating”. This means the controller will stop charging when the battery is full and will automatically start charging the battery as required. This process will also reduce water loss and help prevent the battery from ‘drying out’.

Protects your battery from discharge at night. Under low light or no light conditions the solar panel voltage could be less than the battery voltage. The unit contains a special circuit which prevents current flowing back from the battery and into the solar panel.

PWM & 4 Stage Charging Technology

Digital LCD to Indicate Battery Voltage, Current. Amp Hours

Battery Equalization Mode

Flush Mount

Includes built in port for option battery tempurature sensor

For use with 12 Volt Systems Only.
Suitable for Solar Panels up to 500 Watts.

Right click operation manual after opening and select to rotate document. 


30 amp AP Charge Controller - Operating Manual
 

Other Related Products






  2014 Zamp Solar
Website Design by James Web Design LLC